QNAP TVS-73e Series - Page 21

5. Install a heatsink on the M.2
SSD.
a.
Locate the controller on the M.2
Note
The controller location varies depending on the model and manufacturer of the M.2 SSD.
For details, refer to the documentation or contact the manufacturer.
b.
Remove the protective film from the bottom of the
c.
Install the heatsink on the
Installation and Configuration
SSD.
Locate the controller on the M.2
SSD.
The controller location varies depending on the model and manufacturer of the M.2 SSD.
For details, refer to the documentation or contact the manufacturer.
Remove the protective film from the bottom of the
heatsink.
Install the heatsink on the
controller.
TVS-x73e User Guide
Installation and Configuration
20
The controller location varies depending on the model and manufacturer of the M.2 SSD.