Qrotech OPA-101 - User Manual

OPA-102/101
OPERATION MANUAL
- 1 -
AUTOMOTIVE OPACITY SMOKE METER
O P A - 1 0 2 / 1 0 1
OPERATING MANUAL

Summary

Quality Guarantee Regulation

Safety Guideline

Installing place and Precautions

Essential precautions for safe installation and operation of the product.

Installing Method

5-1 Installing Method.

Step-by-step guide for correctly installing the opacity meter.

Measurement

7-2. Free(Snap) acceleration test (Normal mode)

Procedure for conducting a normal mode free acceleration smoke test.

7-3. Free(Snap) acceleration test (Inspection mode)

Procedure for conducting an inspection mode free acceleration smoke test.

7-4. RPM Measurement (option)

Instructions for measuring engine RPM, if the option is installed.

Set-up

8-1. Calibration

Steps for calibrating the opacity meter to ensure accurate readings.

Maintenance and Management

9-2. Error codes

Explanation of error messages and troubleshooting steps.

Qrotech OPA-101 Specifications

General

Measurement Type	Optical Power
Wavelength Range	800 nm - 1700 nm
Power Range	-70 dBm to +10 dBm
Detector Type	InGaAs
Resolution	0.01 dB
Accuracy	±0.2 dB
Connector Type	FC/PC