22
Using Bluetooth
The KC12 Active Column Loudspeaker System utilizes a Bluetooth module that can be connected as a single playback unit, or with up
to 4x KC12 loudspeakers for either multiple-mono or True Wireless Stereo pairing, for an improved audio experience.
• Bluetooth Menu Quick Access – Short press of the BT button will take the user to the Bluetooth page.
• Single Loudspeaker Pairing
◦ Long press 3+ seconds to engage the pairing mode. When loudspeaker is selected (from the host device), a pairing tone plays
through the loudspeaker when pairing is confirmed.
◦ If the loudspeaker is not paired to a device after 30 seconds of searching, Bluetooth turns off.
◦ If the loudspeaker is paired to a host device and the Bluetooth button is held down for 3 seconds, the currently paired host device
will disconnect (un-pairing tone will play), and the loudspeaker will search for a new host device to pair with.
• Multicast Loudspeaker Pairing
◦ Step 1 – Begin with a single KC12 loudspeaker currently paired to your host device (see connection instructions above), short
press the Bluetooth button to go to the Bluetooth Menu, or navigate to the Menu with the Selector Knob, and press the ENTER
button.
◦ Step 2 – From the KC12 Bluetooth page of the first loudspeaker that is paired to the host device, use the Selector Knob to
navigate to the field next to MULTI and press the ENTER button to confirm Multicast linking mode.
◦ Step 3 – In each Bluetooth Menu of the other KC12 loudspeakers, use the Selector Knob to navigate to the MULTI field and press
the ENTER button to confirm.
◦ Step 4 – When connected, a pairing tone plays through each loudspeaker when a Multicast Link connection is made.
» Each loudspeaker (once connected) can be set to either LEFT, RIGHT, or MONO, from the Bluetooth Menu.
» If a host device is un-paired from the Bluetooth connection, an un-pairing tone is played through the loudspeaker to notify the
user of a connection status change.
NOTE: You cannot connect two loudspeakers in STEREO PAIR mode unless a host device is already paired to your first
KC12 loudspeaker.
• Bluetooth Power Off – Long press the Bluetooth button on the loudspeaker for 5+ seconds to un-pair the host device and turn
Bluetooth off. If other KC12 loudspeakers were previously connected (Stereo or Multicast), all remaining KC12 loudspeakers
connected to the host device will return to MONO Bluetooth audio. An un-pairing tone plays through the loudspeaker when the host
device is un-paired.
Bluetooth Troubleshooting
In the instance that your host device cannot find the KC12 loudspeaker when attempting to PAIR or is having trouble re-connecting, turn
the Bluetooth function in your host device off and then back on again. Navigate to RESET BT and clear all connections by pressing the
ENTER button, and power the KC12 off and back on again. Repeat the connection process again from Step 1.
To Next Page
Loading...
