QSC KC12 - Navigation Example; Menu Map; Menu Listing

18
Navigation Example
To select a Preset:
1. Turn the Selector knob (4) clockwise to highlight the desired PRESET line.
2. Press the Enter button (3) to access the PRESET submenu.
3. Turn the Selector knob (4) clockwise or counterclockwise as needed to highlight the PRESET you wish to recall.
4. Press the Enter button (3) to recall the PRESET. A small triangle displays next to the recalled (active) PRESET.
5. Press the Exit button (2) to return to the Home screen.
Menu Map
Input A
Line
Mic
Hi-Z
Input B
Line
Mic
+48V
Presets A Presets B Reverb Sub Level Contour
Delay Bluetooth Output Select SettingsEQ
Sub Only Mode
Security UtilitiesLEDScenes Regulatory
—Figure13—
Menu Listing
Home Screen
A: LINE
DEFAULT
REVERB
SUB LEVEL
CONTOUR
B: LINE
DEFAULT
OFF
BOOST
DEF
INPUT A: Select the Sensitivity of Input A
LINE – Use with mixers and other sources that have high-level outputs.
MIC – Use with directly connected microphones and sources with low-level output.
HI-Z – Use when connecting musical instruments with passive pick-up systems
(forexample,guitar, bass, etc).
INPUT B: Select the Sensitivity of Input B
LINE – Use with mixers and other sources that have high-level outputs.
MIC – Use with directly connected microphones and sources with low-level output.
+48V – Use when +48V Phantom Power is needed (for example, when connecting
acondenser microphone or DI box)
INPUT A
LINE
MIC
HIZ
INPUT B
LINE
MIC
MIC +48