QSC PLD Series - Saving Presets; Overwrite Preset; Save New User Preset

7
Saving Presets
Presets can be modifi ed and saved using the Save Preset menu. You can start with a Factory Preset (F<n>: <name>), make modifi cations, then save
it as a User Preset (U<n>: <name>). You cannot overwrite Factory Presets. There are two ways to save Presets, Overwrite an existing User Preset, or
Save a new User Preset.
To Overwrite a User Preset, HOME > PRESETS > PRESET SAVE > ENTER
To Save a New User Preset, HOME > PRESETS > PRESET SAVE AS > ENTER
Overwrite Preset
Press ENTER to save preset
U1: Config - A B C D
SAVE
To save, press
To exit without saving, press
EXIT
ENTER
To confirm the save, press
ENTER
STEP 1 — Select and Edit Preset Number
Edit preset number or press EXIT
U1: Config - A B C D
User Preset Number:
21
SAVE
New Preset Name
Con f i g - A
Scroll to desired number (1 thru 50)
To confirm User Preset number, press
ENTER
To edit User Preset number, press
ENTER
STEP 2 — Name the Preset
Press ENTER to edit preset name
U1: Config - A B C D
User Preset Number:
21
SAVE
New Preset Name
Con f i g X A
Indicates more positions
Up to 21 characters, A - Z / a - z / 0 - 9 / _ / - / space
Indicates New Preset
Name selection
Indicates editing
Scroll to desired position
Scroll to New Preset Name
Press
ENTER
Press
ENTER
STEP 3 — Save Preset
Press ENTER to save preset
U1: Config - A B C D
User Preset Number:
21
SAVE
New Preset Name
Con f i g X A
Press
ENTER
When you are finished naming, press
EXIT
Scroll to SAVE
SAVE
To confirm Save, press
ENTER