Each menu contains different kinds of items. There is a small rectangular
frame named “Active Frame” which is pointing to the selected item. This
“Active Frame” can be moved by [Æ] or [Å] keys. There are such kinds of
menu items:
1. Check Box: Provide 2 options, “9” means enable and “×” means
disable. You can use [ENTER] or [EDIT] key to switch over.
2. List Box: Provide more than 2 options. However, only one of them
can be selected. You can use [Ç] and [È] to select one option. For
example, on the right side of “Select Camera”, there is a list box
for you to select one camera.
3. Edit Box: This is for you to input characters. Press [EDIT] key to
enter into edit status, you can input characters as following:
a) Press [A] key to select number, upper case, lower case or
symbols;
b) Use [Æ] and [Å] keys to move cursor;
c) Use [EDIT] key to delete the character in front of cursor;
d) Press [ENTER] or [ESC] to exit edit.
4. Button: Execute a special function or enter into next sub-menu.
For example, press “Policy” button to enter into sub-menu. Press
[Confirm] to save parameters and return to parent menu. Press
[Cancel] button to cancel and return to parent menu. The button in
To Next Page
Loading...
General