motion detection recording). Red means network transmission. Orange
means both recording and network transmission.
Start/Stop: “9” means you can start corresponding channel recording.
“×” means you can stop recording.
Start All: Press this button to start all channels recording.
Stop All: Press this button to stop all channel recording.
Exit manual record
Press [ESC] key to enter into preview mode. Press [MENU] key to enter
into main menu. Press [PLAY] key to enter into playback menu. Press
[PTZ] key to enter into PTZ control mode.
4.6 Playback
Note: The user must have “Playback” right.
Playback interface
In preview mode, press [PLAY] key, in the pop-up login dialog, select
username and input correct password, you can enter into “Playback”
interface.
In menu mode, press [PLAY] key, you can enter into “Playback” interface
directly.
To Next Page
Loading...