5.6 Video Parameters Setup
For different camera and different background, in order to get the best
video image, you need to adjust video parameters such as brightens,
saturation, contrast and hue, etc.
You can setup the camera individually, and also you can copy the video
parameters of one camera to any other cameras. Here are the setup
steps:
Step 1: Enter into “Image Setup” menu:
Step 2: Select camera: Please use [Ç] [È] keys to select one camera.
Step 3: Adjust brightness, contrast, saturation and hue: Move
“Active Frame” to the “Adjust” button on the right side of Brightness,
Contrast, Saturation and Hue, press [ENTER] key, you will enter into the
corresponding adjust interface. In the adjust interface, there is one scroll
bar at the bottom, you can use [Ç] [È] keys to adjust and can find the
video image will be changed at the same time. When you are satisfied
with the real time video image, press [ENTER] to return “Image Setup”
menu.
To Next Page
Loading...
General