quadient IS-200 Base Series - Unpack and Prepare Replacement Machine; Initial Setup and Connections; Power On and Connection Test; Registration and Configuration

Congratulations
Your machine is ready to use!
For more information or if you experience
any issues please visit: kb.quadient.co.uk
A0087511/C - 03/08/2021
Power the machine on.
4
5
Select LAN and press ‘OK’ to test connection type.
6
Obtain registration PIN from MyQuadient.
Registration PIN
www.myquadient.co.uk
7
Select NO as you will need to perform an OLS
call before.
8
Complete the declaration.
Swap base
Swap base
Swap base
For more help with your
installation, please visit:
kb.quadient.co.uk/IS200install
or
kb.quadient.co.uk/is200_
video_QSG
to watch an installation video.
9
Open the door, insert ink cartridge (f) and follow steps to complete alignment test.
A C E G I K
B D F H J
Your machine is almost ready to use. From now on, you need to add credit.
Please turn over for your quick User Guide.
10
2
Insert meter (b).
3
1
2
4
3
Plug in LAN cable (c), weigh platform cable (d - place weighing platform in position) and power cable (e).
1
N2. Unpack your replacement
Remove replacement unit from box & place original unit back into box ready for
collection. Remove shipping materials from the replacement unit.