quadient IS-280 Guide

Instructions On How To Fit A
New Meter To Your Mailing
System
1.1
Please read the following information carefully to complete the
installation of your new meter.
The new meter has to be activated with a registration PIN code found on the accompanying
paperwork.
How to fit a new meter to your mailing system
1. Remove the Meter (PSD) from the white box.
If the system has a weight platform fitted to the top of the unit either
disconnect the platform at the back of the unit or take care when
locating the meter cover. If the platform is not supported when the
unit is placed on its back, damage may be caused to the platform.
3
| Page 3 | | Jun-01-2015 05:11 |
1

quadient IS-280 Specifications

General

Brand	quadient
Model	IS-280
Category	Postal Equipment
Language	English