quadient IS-280 Guide

2. Disconnect the power supply from the rear of the unit.
If the weight platform is still connected support the scale when the
unit is placed on its back or lift the platform off the base and remove
the connector
3. Carefully place the unit on its back.
Open the meter cover as shown and then remove the old meter by sliding it up and
out.
Place the meter to be returned in a safe place.
4
| Page 4 | Jun-01-2015 05:11 |
1

quadient IS-280 Specifications

General

Brand	quadient
Model	IS-280
Category	Postal Equipment
Language	English