quadient IS Series User Manual

10
IP Configuration report
A report can be obtained to assist your IT department when configuring your
network firewall to allow traffic from the mailing system.
To access the report please follow steps 1-3 in page 7 and 8 of this booklet
“Manually configuring LAN communication settings” this will allow you
access to the “supervisor menu”.
4.
Select “Reports” from the me
nu.
5. Select “IP Configuration report”
6
. Make sure that labels are present in the label feeder. Select “Get report”
|Note: IS350 uses double labels which can be fed the same way as an
envelo
pe.
The lab
el will be printed showing the current network settings assigned
to
the mailing system
.
Select report
7 Multi account
8 Base errors
9 Meter errors
11 Proxy configuration report
10 IP Configuration report
EXA
M
P
L
E

quadient IS Series Specifications

General

Category	Digital Mailing System
Input Capacity	Up to 500 envelopes
Output Capacity	Up to 500 envelopes
Connectivity	Ethernet, USB
Dimensions	Varies by model
Weight	Varies by model
Feeder Type	Automatic
Minimum Envelope Size	3.5 x 5 inches (89 x 127 mm)
Power Requirements	50/60Hz