Quadra-Fire SANTAFE-C - 1 Listing and Code Approvals; Appliance Certification; BTU & Efficiency Specifications

7April 2, 2019 7050-802B
SANTA FE FREESTANDING
Model Santa Fe Pellet Appliance
Laboratory OMNI Test Laboratories, Inc.
Safety
Report No.
061-S-77d-6.2
Type
Solid Fuel Room Appliance/Pellet Fuel
Burning Type
Standard
ASTM E1509-04, ULC S627-00 and ULC/
ORD-C1482-M1990 Room Appliance
Pellet Fuel Burning type and (UM) 84-
HUD, Mobile Home Approved.
This pellet appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate
this pellet appliance in a manner inconsistent with operating instructions in this manual.
1 Listing and Code Approvals
A. Appliance Certication
NOTICE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM
E1509-04, ULC S627-00, (UM) 84-HUD and ULC/ORD-C-1482.
B. BTU & E󰀩ciency Specications
Emissions Report #: 0061PM077E
EPA Certication #: 175-19
EPA Certied Emissions: 1.1 grams per hour
*LHV Tested E󰀩ciency: 70.4%
**HHV Tested E󰀩ciency: 66.1%
***EPA BTU Output: 5,800 to 22,400 / hr.
****BTU Input: 9,300 to 30,600 / hr.
Vent Size:
3 or 4 “L” or “PL”, or 6
inches
Hopper Capacity: 52 lbs.
Fuel Premium Wood Pellets
* Weighted average LHV e󰀩ciency using data collected
during EPA emissions test.
**Weighted average HHV e󰀩ciency using data collected
during EPA emissions test.
***A range of BTU outputs based on HHV and the burn
rates from the low and high EPA tests.
****Maximum BTU input based on the high burn section
of the EPA emissions test.
The Santa Fe is Certied to comply with
2020 particulate emission standards.