Quadro 350D - Helmet Compartment; Front Glove Box

40
4.16 4.16
4.16 4.16
4.16
HELMET HELMET
HELMET HELMET
HELMET
COMPARTMENTCOMPARTMENT
COMPARTMENTCOMPARTMENT
COMPARTMENT
To gain access to the helmet compartment, proceed as follows:
n Use your key to rotate the ignition switch clockwise up to the
seat opening position
«A» «A»
«A» «A»
«A» .
n Lift the seat.
n Access the helmet compartment.
The helmet compartment can fit two full-face helmets;The helmet compartment can fit two full-face helmets;
The helmet compartment can fit two full-face helmets;The helmet compartment can fit two full-face helmets;
The helmet compartment can fit two full-face helmets;
To close the seat, proceed as follows:
n Lower the seat and press down at the rear to engage in the seat
lock.
4.17 FRONT 4.17 FRONT
4.17 FRONT 4.17 FRONT
4.17 FRONT
GLOVE BOXGLOVE BOX
GLOVE BOXGLOVE BOX
GLOVE BOX
To gain access to the front glove box
«G»«G»
«G»«G»
«G», press in the point shown
in the figure and open the glove box flap.
Maximum loadMaximum load
Maximum loadMaximum load
Maximum load
::
::
: 1,5 kg
Fig.12_04Fig.12_04
Fig.12_04Fig.12_04
Fig.12_04
Fig.13_04Fig.13_04
Fig.13_04Fig.13_04
Fig.13_04
Fig.14_04Fig.14_04
Fig.14_04Fig.14_04
Fig.14_04
VEHICLE DESCRIPTIONVEHICLE DESCRIPTION
VEHICLE DESCRIPTIONVEHICLE DESCRIPTION
VEHICLE DESCRIPTION