62
6.6 SPARK PLUG6.6 SPARK PLUG
6.6 SPARK PLUG6.6 SPARK PLUG
6.6 SPARK PLUG
Let the engine cool down before carryingLet the engine cool down before carrying
Let the engine cool down before carryingLet the engine cool down before carrying
Let the engine cool down before carrying
out any maintenance operation.out any maintenance operation.
out any maintenance operation.out any maintenance operation.
out any maintenance operation.
The spark plug must be inspected and replaced in accordance
with the scheduled maintenance chart (see pag. 77).
n Rest the vehicle on its centre stand and on level ground.
n Lift the seat, remove the three fixing screws
«1»
«1»
«1»«1»
«1» and lift the
inspection flap
«C».«C».
«C».«C».
«C».
n Release the plug pap
«2»«2»
«2»«2»
«2» from the plug’s terminal, (see fig. 10_06).
n Remove the park plug
«3»«3»
«3»«3»
«3» using a box spanner, (see fig. 11_06).
n Clean off any dirt and carbon residue from the spark plug. Check the
spark gap.
n Manually screw the spark plug in its seat
n Carefully refit the spark plug cap
«2».«2».
«2».«2».
«2».
Recomended Spark plug: Recomended Spark plug:
Recomended Spark plug: Recomended Spark plug:
Recomended Spark plug: NGK DPR7EA-9
Spark gap: Spark gap:
Spark gap: Spark gap:
Spark gap: 0.6 ÷ 0.7 mm
Tightening torque specifications (Nm)Tightening torque specifications (Nm)
Tightening torque specifications (Nm)Tightening torque specifications (Nm)
Tightening torque specifications (Nm)
Spark plug:Spark plug:
Spark plug:Spark plug:
Spark plug: 10 ÷ 20
Fig.09_06Fig.09_06
Fig.09_06Fig.09_06
Fig.09_06
Fig.10_06Fig.10_06
Fig.10_06Fig.10_06
Fig.10_06
MAINTENANCE VEHICLEMAINTENANCE VEHICLE
MAINTENANCE VEHICLEMAINTENANCE VEHICLE
MAINTENANCE VEHICLE
To Next Page
Loading...
