13
2
fi g. 7
While disengaging the park-
ing brake, it is important not to let
go of the lever, but rather to ac-
company it by applying an oppos-
ing force.
fi g. 8
HTS (Hydraulic Tilting System)
LOCK/RELEASE LEVER
The scooter is equipped with an oleo-
pneumatic front and rear suspension
system, known as HTS (Hydraulic Tilting
System).
This system allows the scooter to tilt
like normal two-wheeled scooters, while
at the same time providing the safety
of a four-wheeled vehicle due to the
grip provided by all four wheels on the
ground.
Disengagement
Proceed as follows to disengage the
parking brake:
• Turn the ignition key anticlockwise
to the
position and hold it there
• Lower lever A fi g. 8, accompany-
ing it from position 1 to position 0
without letting go for the whole
duration of the operation
• Release the key
Lever A fi g. 9, located on the leg shield,
locks or releases front HTS tilting.
fi g. 9
• Move the scooter forwards and
backwards in order to ensure
that the parking brake is correctly
engaged.
A protective device limits
engine speed if you attempt to ac-
celerate with the parking braking
engaged.
To Next Page
Loading...
