24
USE
This chapter describes the main
operations which must be performed
and some tips to adopt when preparing
to drive the Quadro4.
It also provides instructions to be
followed when you park the vehicle.
IGNITION KEY
The ignition key fi g. 1 is located in the
upper part of the leg shield. The key can
be turned to the following positions, as
required
:
1 - Steering lock (requires the key to be
pressed).
2 - Position enabling parking brake
engagement/release.
3 - OFF.
4 - ON.
5 - Seat opening.
If you are not able to start
the scooter, consult an authorised
Quadro dealer.
fi g. 1
ENGINE START
Proceed as follows to start the scooter:
• Ensure that button A Fig. 2 is in
position 0
• Release the parking brake, if
engaged
• Turn the key to the position
• Hold the accelerator at the idle posi-
tion
• Pull one of the two brake levers on
the handlebar (or press the brake
pedal) and press the starter button
B fi g.2.
fi g. 2
To Next Page
Loading...
