33
4
When washing the vehi-
cle, the brake components may
come into contact with water and
degreasers: this may
lead to a momentary loss of brak-
ing power and an increase in stop-
ping distances.
In order to restore normal opera-
tion, drive the scooter cautiously
and activate the brakes numerous
times.
If you are using a pres-
sure washer to clean the scooter,
take care not to direct the wa-
ter jet onto the electrical and/or
mechanical parts.
Use cold water to remove
road salt.
Clean the vehicle more frequently if you
regularly drive on gritted/salted roads.
Hot water increases the
corrosive effects of the salt.
Do not use sponges or
cloths which have come into
contact with abrasive chemical
products, solvents, thinners, rust
treatments, brake fl uid, antifreeze
etc.
Do not use strong deter-
gents or any type of harsh chemi-
cal product (degreasers etc.) for
cleaning the windscreen.
Only use soft sponges in order to
avoid removing the anti-scratch/
anti-refl ective treatment.
To Next Page
Loading...
