Quadro Quadro4 2017 - Page 38

36
MAINTENANCE
No. Part Operation to be carried out
Odometer reading (km x 1000)
Annual
checks

1 5 10 15 20 25 30 35 40
Odometer reading (miles x 1000)
0.6 3 6 9 12 15 18 21 24
9 Variator rollers Check and replace if necessary
 
On reaching 40000 km, checks must be repeated
starting from the 5000 km interval
10 Variator case air fi lter Clean or replace if necessary
 
11 Clutch Check

12
Final drive and differential
oil
Visually check for leaks
 
Replacement and leakage check

13 Final drive belts
Check and adjust tension

Replace if necessary

14
Exhaust system fastening
screws
Check and tighten if necessary
 
15 Timing chain Replace

16 Accelerator control grip Check free play, adjust if necessary
 
17 HTS
Check and restore front (central) and rear
(right) reservoir air pressure

Trim visual check
  
Change oil
