Quanta Computer CTL GQE10C Series User Manual

GETTING STARTED
Connecting the AC power adapter to your
system
To connect your CTL Meet Compute System to the power outlet, do
the following:
1. Connect one end of the power cord to the AC adapter and the
other end to the power outlet.
2. Connect the AC adapter to the DC-in jack of your CTL Meet
Compute System.
3. Plug the AC power adapter into a 100V-240V power source.
NOTE: The power adapter may vary in appearance, depending on models and your
region.
IMPORTANT!
• We strongly recommend that you use only the AC power adapter and cable
that came with your system.
• We strongly recommend that you use a grounded wall socket while using
your system.
• The socket outlet must be easily accessible and near your system.
• To disconnect your system from its main power supply, unplug your system
from the power
GETTING STARTED
13

Quanta Computer CTL GQE10C Series Specifications

General

Brand	Quanta Computer
Model	CTL GQE10C Series
Category	Computer Hardware
Language	English