TROUBLESHOOTING
If you experience a problem with your CTL Meet Compute
System, refer to the following troubleshooting guide. If a
problem persists, contact the service center.
The power is switched on, but CTL Meet Compute System
does not start:
•
Make sure that the AC adapter is properly plugged
into the DC-in jack of the CTL Meet Compute System
and to the power outlet. Refer to page 13.
Cannot access the LAN:
•
Make sure you have connected one end of an RJ-45
cable to the LAN port of your CTL Meet Compute
System and the other end to the network connection
device or a network wall connector. Refer to page 16.
•
Make sure you have configured the LAN settings
correctly. Refer to page 24.
Cannot connect to the Bluetooth device:
•
Make sure the Bluetooth device you want to connect to is
near- by your CTL Meet Compute System and is visible
to other devices.
No audio is heard from the CTL Meet Compute System:
•
Make sure audio is not muted. Refer to page 23.
TROUBLESHOOTING
29
To Next Page
Loading...
Need help?
General