SAFETY
Your CTL Meet Compute System is designed and tested to meet the
latest standards of safety for information technology equipment.
However, to ensure your safety, it is important that you read the
following safety instructions.
Setting up your system
•
Read and follow all instructions in the documentation before you
operate your system.
•
Do not use this product near water or a heated source.
•
Set up the system on a stable surface.
•
Openings on the chassis are for ventilation. Do not block or cover
these openings. Make sure you leave plenty of space around the
system for ventilation. Never insert objects of any kind into the
ventilation openings.
•
Use this product in environments with ambient temperatures
between 0°C to 35°C.
•
If you use an extension cord, make sure that the total ampere rating
of the devices plugged into the extension cord does not exceed its
ampere rating.
Care during use
When using this CTL Meet Compute System, basic safety precautions
should always be followed to reduce the risk of fire, electric shock and
injury to persons, including the following:
•
Do not place the device on an uneven or unstable surface.
•
Do not use this device near water.
•
Do not spill water or other liquids into or on the device.
•
The device may produce some heat during normal operation or
charging. If you feel the device is too warm, avoid sustained
contact with exposed skin otherwise this might cause discomfort,
or eventually a burn.
4
SAFETY
To Next Page
Loading...
Need help?
General