Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide 23
5. Lift the latch on top of the Node and slide the cover back.
6. Grasp the cover on both sides, and carefully lift the cover away from the Node.
7. a. Remove the cooling shroud by holding the touch points and lifting the shroud away from the Node
(see Figure 12 below).
Figure 12: Removing the Cooling Shroud
1. Cooling shroud
8. Remove the cooling-fan assembly by lifting the release levers upwards (see Figure 13 on the next
page).
To Next Page
Loading...
