Quantum DXi4700 - Page 37

Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide 37
units are included with the optional 10 GbE network card.)
DXi4700 G2: Installing the X520 Network Card
To install the X520 10 GbE network card in the DXi4700 G2 Node:
Caution: Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
1. Lift the expansion card latch out of the slot (see Figure 26 below).
The expansion card latch is located to the right of PCIe slot 4 as you face the rear of the Node. The latch
will remain attached to the system.
Figure 26: Installing the X520 Card in Riser 2
1
2
3
4
5