Quantum DXi4700 - Page 40

Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide 40
Figure 28: Installing the X540 Card in Riser 2
1
2
3
4
5
Item Description
1 Expansion card latch (blue)
2 X540 card
3 Metal slot cover
4 Expansion card connector
5 Expansion card riser 2
2. Remove the metal slot cover from slot 4 by sliding it out of the slot.
3. Holding the X540 card by its edges, position the card so that the connector on the X540 card aligns with
the expansion card connector on the riser.
4. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.