Quantum DXi4700

Installing Components in the DXi4700 Node
Quantum DXi4700 Installation Guide 41
5. Push the expansion card latch down to lock the X540 card in place.
Closing the Node Cover
To close the DXi4700 Node cover:
1. Lift the latch on the cover (see Figure 29 below).
Figure 29: Replacing the Node Cover
1
2
3
Item Description
1 Latch release lock
2 Latch
3 Node cover
2. Place the cover onto the Node chassis and offset the cover slightly back so that it clears the chassis
hooks and lays flush on the chassis.
3. Push down the latch to move the cover into the closed position.
4. Rotate the latch release lock in a clockwise direction to secure the cover.