Initial Configuration
Quantum DXi4700 Installation Guide 59
Figure 47: Getting Started Wizard: Access Control
4. Create a new password for the GUI Administrator user account:
a. Enter the Old Password (password).
b. Enter a New Password.
Note: The GUI Administrator password can be up to 32 characters. Alphanumeric characters
and special characters are allowed.
c. Enter the new password again in Confirm New Password.
5. Create a new password for the Service SSH (ServiceLogin) user account:
a. Enter a New Password.
Additional Information
l The Service SSH password can be up to 20 characters. Alphanumeric characters and
special characters are allowed.
l The Service SSH (ServiceLogin) password is also used for iDRAC/IPMI login.
l The Access Control page in the Remote Management Console allows the Service SSH
(ServiceLogin) and iDRAC login to be disabled.
b. Enter the new password again in Confirm New Password.
6. Click Next to continue.
The Network page displays (see Figure 48 on page 61)
IMPORTANT - READ BEFORE CONTINUING
To Next Page
Loading...
