Initial Configuration
Quantum DXi4700 Installation Guide 64
Note: You can also choose to synchronize the system time with an NTP time server. To select a
timeserver pool, you must have specified at least one DNS IP address above. Otherwise, you must
specify the IP address of the timeserver pool. For more information, see the Quantum DXi4700
User’s Guide.
14. In the Timezone drop-down box, select the time zone where the DXi4700 is located.
15. Next to Time Format, select the format to use when displaying times (24 hours or 12 hours).
16. Click Next to continue.
The Confirm page displays (see Figure 50 on the next page).
To Next Page
Loading...
