Initial Configuration
Quantum DXi4700 Installation Guide 76
Figure 63: License Details
Taking Next Steps
Before the customer can begin using the DXi4700 for backups, they must configure the system. Here are
next steps the customer can take:
l Configuring Email Reports below
l Using the Configuration Wizards on the next page
l Operating the DXi4700 on the next page
l Installing Additional DAE/Veeam Memory Modules on page 78
Configuring Email Reports
Quantum recommends enabling Email Reports after you install your DXi. When enabled, Email Reports
periodically sends system configuration and status information to Quantum, including any software
upgrades you have installed using the Software Upgrade Utility. Quantum Support can use this
information to provide a better support experience in the future.
To configure Email Reports:
To Next Page
Loading...
