Quantum DXi4700 - Page 84

DAE/Veeam Memory Module Installation
Quantum DXi4700 Installation Guide 84
Item Description
4 Expansion card riser 2
l Optional X520 network card (DXi4700 G2)
l Optional X540 network card
5 Expansion card riser 3
l H810 RAID Controller (DXi4700 G1)
l H830 RAID Controller (DXi4700 G2)
Installing the DAE/Veeam Memory Modules
Install the additional DAE/Veeam memory modules in the Node (see Table 1 below). Memory modules must
be installed in the correct sockets in order for the system to function properly (see Figure 71 on the next
page).
Note: Memory socket numbers are displayed on the clear window on the cooling shroud.
Table 1: DAE or Veeam Memory Configurations
DXi4700
Configuration
Total
System
Memory
Actions to Take
5 - 27 TB 64 GB 1. Leave the pre-installed modules in slots A1–A4 and B1–B4 (white
sockets).
2. Install 8 x 4 GB memory modules in slots A5-A8 and B5-B8 (black
sockets)
45 - 99 TB 96 GB 1. Leave the pre-installed modules in slots A1–A4 and B1–B4 (white
sockets).
2. Install 8 x 4 GB memory modules in slots A5–A8 and B5–B8 (black
sockets).
3. Install 8 x 4 GB memory modules in slots A9-A12 and B9-B12
(green sockets).
117 - 135 TB 128 GB 1. Remove the pre-installed modules in slots A1–A4 and B1–B4 (white
sockets).
2. Install 8 x 8 GB memory modules in slots A1-A4 and B1-B4 (white
sockets).
3. Install 8 x 4 GB memory modules in slots A5–A8 and B5–B8 (black
sockets).
4. Install 8 x 4 GB memory modules in slots A9–A12 and B9–B12
(green sockets).