DAE/Veeam Memory Module Installation
Quantum DXi4700 Installation Guide 87
Figure 73: Replacing the Cooling-Fan Assembly
6. Replace the cooling shroud:
a. Align the tabs on the cooling shroud with the securing slots on the chassis (see Figure 74 below).
Figure 74: Replacing the Cooling Shroud
b. Lower the cooling shroud into the chassis until it is firmly seated.
Note: For proper seating of the cooling shroud in the chassis, ensure that the cables inside
the system are routed along the chassis
Closing the Node Cover
To close the DXi4700 Node cover:
To Next Page
Loading...
