Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 282
Name The name of the destination.
Selected Traps The traps the DXi4700 sends to the destination (Failure, Warning, Informational,
Available, or Unavailable).
Adding a Destination
Add an SNMP destination to send traps from the DXi4700 to the destination.
Note: You can add up to 5 destinations.
To add a destination:
1. Click Add.
The Add Trap Destination page displays (see Figure 176 below).
Figure 176: Add Trap Destination Page
2. Enter information about the destination:
To Next Page
Loading...
