Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 283
IP Address Enter the IP address of the system that will receive the traps generated by the DXi4700.
Additional Information
l When entering IP addresses, never use an address that is in a reserved IP address
range. To see a list of reserved IP address ranges, click the quick tip icon [?]
located near the IP address field.
l To use hostname format, you must specify at least one DNS IP address on the
Network page (see Network on page 290).
Name Enter the name of the destination.
3. Select one or more traps to send to the destination:
Failure Sends failure traps.
Warning Sends warning traps.
Informational Sends informational traps.
Available Sends a trap when the system transitions from an unavailable to an available state.
Unavailable Sends a trap when the system transitions from an available to an unavailable state.
4. Click Apply.
Editing a Destination
Edit an SNMP destination to change the name of the destination or the types of traps the DXi4700 sends to
the destination.
To edit a destination:
1. Click Edit.
The Edit Trap Destination page displays (see Figure 177 on the next page).
To Next Page
Loading...
