Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 284
Figure 177: Edit Trap Destination Page
2. Enter information about the destination:
Note: If you are editing a destination, you cannot change the IP Address.
IP Address (Optional) Select a different destination to edit.
Name Enter the name of the destination.
3. Select one or more traps to send to the destination:
Failure Sends failure traps.
Warning Sends warning traps.
Informational Sends informational traps.
Available Sends a trap when the system transitions from an unavailable to an available state.
Unavailable Sends a trap when the system transitions from an available to an unavailable state.
4. Click Apply.
Deleting a Destination
Delete an SNMP destination if you no longer want the DXi4700 to send traps to the destination.
To delete a destination, select the destination and click Delete.
Note: You can select multiple destinations to delete at once.
Community
The Community page allows you to manage SNMP community information for the DXi4700. You can add,
To Next Page
Loading...
