Quantum DXi4700

Chapter 9: Configuration
Notifications
Quantum DXi4700 User’s Guide 285
edit, and delete communities, and you can specify the community access type.
To access the Community page, on the SNMP page, click the Community tab (see Figure 178 below).
Figure 178: Community Page
Tasks
Use the Community page to perform the following tasks:
l View information about SNMP communities (see SNMP Community List below).
l Add an SNMP community (see Adding a Community on the next page).
l Edit an SNMP community (see Editing a Community on page 287).
l Delete an SNMP community (see Deleting a Community on page 289).
SNMP Community List
The SNMP Community List displays the following information about SNMP communities:
Name The name of the community.
IP Address The IP address of the community.
Network Mask The network mask of the community.
Access Type The access type of the community (Get or Get/Set).
Community Status The status of the community (Enabled or Disabled).