Quantum Q-Logic 3 Programming Guide

21
SEAT
Seat Programming — Input Command Inverted
(Econ-W)
If the end user is having issues pushing forward to come out
of tilt or recline, the polarity of the joystick can be reversed
for actuator use only.
1. Click on the Seat icon.
2. Click on Functions.
3. Find the actuator to invert the command on and click on
the Input Command Inverted check box.
4. After the changes are made,click on the Save icon. .
Figure 8. Seat Programming - Input Command Inverted
Econ-W
Combined Latched Seating
This document will help you set a demo chair with combined
latched seating to mimic "Memory Seating." Keep in mind,
do not call this memory seating. This is just a way to mimic
what memory seating does in the Q-Logic 3 Drive Control
System by using the Combined Function Feature along with
the actuator speeds and accelerations.
Here are the programming steps:
1. Once connected to Econ-W, go the Seat Configuration
on the top tool bar.
2. Click on Combined Functions on the left side.

Quantum Q-Logic 3 Specifications

General

Brand	Quantum
Model	Q-Logic 3
Category	Remote Control
Language	English