17 | www.qntmnet.com
Reset Access Point to factory defaults
o Power on the Access Point
o Push the reset button on the back panel and hold it for 10 seconds.
o Access Point would restart with factory defaults
Access Point default login detail
With standalone mode:
User Name: Created while doing "Quick Setup"
Password: Created while doing "Quick Setup"
With RUDDER mode:
User Name: Auto Generated, administrator can change from site settings.
Password: Auto Generated, administrator can change from site settings.
If you encounter problems while installing or using this product, please browse
www.qntmnet.com for:
Direct contact with the support center.
o Contact: 18001231163
o Email: support@qntmnet.com
Frequently Asked Questions (FAQ)
Download area for the latest software, user documentation and product updates.
To Next Page
Loading...