Quantum QXS-312 - Packaged Dimensions and Weight; Bezel

8 QXS Site Planning Guide
Packaged Dimensions and Weight
Table 6 identifies the packaged dimensions and weight of the QXS-312/324 RAID and expansion
chassis.
Bezel
The QXS 2U drive chassis includes a bezel sub-assembly that attaches to the front panel of the
chassis. The bezel, comprised of a vented cover attached to an electro-magnetic interference (EMI)
shield, is pre-assembled and packed within a box contained in the enclosure master shipping
container.
Instructions for attaching/removing the bezel are provided in the
QXS Bezel Installation Guide .
CAUTION: The bezel should be properly installed while the chassis is in operation to ensure
adequate EMI protection for the drives.
Ta ble 6 QXS-312/324 RAID and Expansion Chassis Packaged Dimensions and Weight
Chassis Height Width Depth Weight
QXS-312 RAID
(FC/iSCSI)
10.75 inches/
27.31cm
25.875 inches
65.72cm
29 inches/73.66cm 60 lbs/27.22kg
QXS-312 RAID (SAS) 10.25 inches/
26.04cm
25.75 inches/
65.41cm
28.75 inches/
73.03cm
70 lbs/31.75kg
QXS-312 Expansion 10.125 inches/
25.72cm
29 inches/ 73.66cm 30 inches/ 76.2cm 50 lbs/22.68kg
QXS-324 RAID
(FC/iSCSI)
10.5 inches/
26.67cm
25.875 inches/
65.72cm
28.75 inches/
73.03cm
70 lbs/31.75kg
QXS-324 RAID (SAS) 10.25 inches/
26.04cm
25.75 inches/
65.41cm
28.75 inches/
73.03cm
70 lbs/31.75kg
QXS-324 Expansion 10.5 inches/
26.67cm
26.125 inches/
66.36cm
29 inches/73.66cm 50 lbs/22.68kg