Quantum QXS-312 - QXS-4 Series RAID and Expansion Rackmount Chassis Weights; QXS-4 Series RAID Rackmount Chassis Weights

26 QXS Site Planning Guide
QXS-4 Series RAID and Expansion Rackmount Chassis
Weights
This section provides the following information:
• QXS-4 Series RAID Rackmount Chassis Weights
• QXS-4 Series Expansion Rackmount Chassis Weights
QXS-4 Series RAID Rackmount Chassis Weights
Table 1 6 provides the RAID rackmount chassis weights (12, 24, 48, and 56-drive systems).
Ta ble 16 QXS-4 Series RAID Rackmount Chassis Weights (12, 24, 48, and 56-drive systems)
Specifications Rackmount
12-Drive Chassis (LFF, 2U12):
• Chassis with FRUs (no drives)
1-3
• Chassis with FRUs (including drives)
1-4
9.3 kg (20.6 lb) [chassis]
• 18.1 kg (40.0 lb)
• 27.7 kg (61.0 lb)
24-Drive Chassis (SFF, 2U24):
• Chassis with FRUs (no drives)
1-3
• Chassis with FRUs (including drives)
1-4
8.6 kg (19.0 lb) [chassis]
• 17.4 kg (38.4 lb)
• 23.4 kg (51.6 lb)
48-Drive Chassis (SFF, 2U48):
• Chassis with FRUs (no drives)
1-3
• Chassis with FRUs (including drives)
1-4
12.7 kg (28.0 lb) [chassis]
• 23.1 kg (50.9 lb)
• 34.0 kg (74.9 lb)
56-Drive Chassis (LFF, 4U56):
• Chassis with FRUs (no drives)
1-3
• Chassis with FRUs (including drives)
1-4
14.9 kg (32.8 lb) [chassis]
• 46.3 kg (102.1 lb)
• 87.0 kg (191.7 lb)
1
Weights shown are nominal, and subject to variances.
2
Rail kits add between 2.8 kg (6.2 lb) and 3.4 kg (7.4 lb) to the aggregate chassis weight.
3
Weights may vary due to different power supplies, IOMs, and differing calibrations between scales.
4
Weights may vary due to actual number and type of drives (SAS SSD, enterprise SAS, or midline SAS) and air
management modules installed.