Scalar i500 Basic SNMP Reference Guide 7
MIB Variables - IPv6 Information
You can poll the following variables to obtain information about IPv6 on the library.
IPv6 Forwarding
Name: ipv6Forwarding
Type: OBJECT-TYPE
OID: 1.3.6.1.2.1.55.1.1
Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-
2(1).ipv6MIB(55).ipv6MIBObjects(1).ipv6Forwarding(1)
Module: IPV6-MIB
Parent: ipv6MIBObjects
Next sibling: ipv6DefaultHopLimit
Numerical syntax: Integer (32 bit)
Base syntax: INTEGER
Composed syntax: INTEGER
Status: current
Max access: read-write
Value list:
1: forwarding(1)
2: notForwarding(2)
Description:The indication of whether this entity is acting as an IPv6 router with respect to the forwarding
of datagrams received by, but not addressed to, this entity. IPv6 routers forward datagrams. IPv6 hosts do
not (except those source-routed via the host).
Note that for some managed nodes, this object may take on only a subset of the values possible.
Accordingly, it is appropriate for an agent to return a "wrongValue" response if a management station
attempts to change this object to an inappropriate value.
All variables share the same object ID (OID) prefix of: 1.3.6.1.2.1.55.1.
To Next Page
Loading...
Need help?
General
