10 MIB Variables - IPv6 Information
• If this network interface operates over another IPv6 interface, the value of this object refers to an
instance of ipv6IfIndex.
• If this network interface is not currently operating over an active protocol layer, then the value of this
object should be set to the OBJECT ID 0 0 .
IPv6 Effective Maximum Transmission Unit
Name: ipv6IfEffectiveMtu
Type: OBJECT-TYPE
OID: 1.3.6.1.2.1.55.1.5.1.4
Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-
2(1).ipv6MIB(55).ipv6MIBObjects(1).ipv6IfTable(5).ipv6IfEntry(1).ipv6IfEffectiveMtu(4)
Module: IPV6-MIB
Parent: ipv6IfEntry
Prev sibling: ipv6IfLowerLayer
Next sibling: ipv6IfReasmMaxSize
Numerical syntax: Gauge (32 bit)
Base syntax: Unsigned32
Composed syntax: Unsigned32
Status: current
Max access: read-only
Units: Octets
Description: The size of the largest IPv6 packet which can be sent/received on the interface, specified in
octets.
IPv6 Interface Physical Address
Name: ipv6IfPhysicalAddress
Type: OBJECT-TYPE
OID: 1.3.6.1.2.1.55.1.5.1.8
Full path: iso(1).org(3).dod(6).internet(1).mgmt(2).mib-
2(1).ipv6MIB(55).ipv6MIBObjects(1).ipv6IfTable(5).ipv6IfEntry(1).ipv6IfPhysicalAddress(8)
Module: IPV6-MIB
Parent: ipv6IfEntry
Prev sibling: ipv6IfIdentifierLength
Next sibling: ipv6IfAdminStatus
Numerical syntax: Octets
Base syntax: OCTET STRING
Composed syntax: PhysAddress
Status: current
To Next Page
Loading...
Need help?
General