Queclink GB130MG - Introduction to Queclink GB130 MG; GB130 MG Protocol Reference

GB130MG User Manual
TRACGB130MGUM001 - 5 -
1. Introduction
The GB130MG is a device designed for self-installation. It simply mounts directly onto the
vehicle’s battery with only two wires to attach. This approach allows for either a very low cost
installation or for the insurance customer to self-install. Its built-in GNSS receiver has very high
sensitivity, a fast time to first fix and supports 1Hz (every second) location sampling during
vehicle motion. Its built-in Bluetooth can be used for data transmission. Its multiband LTE Cat-M1
and Cat-NB2 allow the GB130MG location to be monitored in real time or periodically tracked by
a backend server and mobile devices. Its built-in 3-axis accelerometer allows motion detection,
800Hz pre/post incident data collection, and extends battery life through sophisticated power
management algorithms. System integration is straightforward as complete documentation is
provided for the full featured @Track protocol. The @Track protocol supports a wide variety of
reports including emergency, geo-fence boundary crossings, low battery, and scheduled and
compressed GNSS position.
1.1. Reference
Table 1. GB130MG Protocol Reference
SN
Document Name
Remark
[1]
GB130MG @Track Air Interface Protocol
The air protocol interface between GB130MG
and backend server.