LTE Module Series
AG35 SMTP AT Commands Manual
AG35_SMTP_AT_Commands_Manual Confidential / Released 11 / 30
Parameter
Example
//Add recipients.
AT+QSMTPDST=1,1,“quectel_test@aol.com” //Add the recipient and the recipient type is 1
which means all recipients.
OK
AT+QSMTPDST=1,2,“quectel_test@21cn.com” //Add the recipient and the recipient type is 2
which means CC recipients.
OK
AT+QSMTPDST?
+QSMTPDST: 1,“quectel_test@aol.com”
+QSMTPDST: 2,“quectel_test@21cn.com”
OK
//Delete all recipients.
AT+QSMTPDST=0 //Delete all recipients.
OK
AT+QSMTPDST?
OK
Write Command
AT+QSMTPDST=<mode>[,<type>[,<e
mailaddr>]]
Response
If the format is correct and it is not sending an email:
OK
Or
+CME ERROR: <err>
<mode> Integer type. Add or delete recipients.
0 Delete
1 Add
<type> Integer type. The type of recipients.
1 All recipients
2 CC recipients
3 BCC recipients
<emailaddr> String type. The email address of recipients. The maximum size of the parameter
is 50 bytes.
<err> Integer type. The error code of the operation. Please refer to Chapter 5.
To Next Page
Loading...
