Need help?Do you have a question about the Quectel LTE-A Module Series and is the answer not in the manual?
General| Brand | Quectel |
|---|---|
| Model | LTE-A Module Series |
| Category | Control Unit |
| Language | English |
Essential safety precautions for operating and handling the module, including driving and aircraft usage.
Overview of the EM120R-GL&EM160R-GL LTE-A modules and their capabilities.
Detailed list of the primary features and specifications of the modules, including LTE bands and speeds.
Block diagram illustrating the module's internal architecture and key connections.
Information about Quectel's evaluation board for convenient application development.
Visual representation and numbering of the module's M.2 connector pins.
Detailed explanation of each pin's function, I/O type, and power domain.
Requirements, voltage drop considerations, and reference design for the module's power supply.
Procedures and timing for powering the module on and off via hardware or AT commands.
How to reset the module using the RESET# pin and associated timing.
Details on supporting 1.8V/3.0V SIM cards and hot-plug detection.
Specifications and usage of the USB 3.0/2.0 interface for communication and debugging.
Compliance with PCI Express 2.1, usage for data, debugging, and firmware upgrade.
Support for audio communication using Pulse Code Modulation (PCM) digital interface.
Definitions and functions of signals like WWAN_LED#, WAKE_ON_WAN#, W_DISABLE signals.
Pin definition for the coexistence UART interface.
Interfaces for antenna tuner control using GPIOs and RFFE signals.
Definition and usage of configuration pins for module setup.
Integrated global navigation satellite system solution supporting GPS, GLONASS, BeiDou, Galileo.
Details on main, Rx-diversity/GNSS, and MIMO antenna connectors.
Lists the operating frequency bands for WCDMA and LTE technologies.
Frequency specifications for the GNSS antenna connector.
Requirements for main, Rx-diversity/GNSS, and MIMO antennas.
Critical voltage and current limits for the module's operation.
Minimum, typical, and maximum voltage requirements for the module's power input.
Voltage levels for input (VIH, VIL) and output (VOH, VOL) signals.
Temperature ranges for normal operation, extended operation, and storage.
Typical current consumption of the module in various states.
Transmit power levels for different WCDMA and LTE frequency bands.
Minimum conducted RF receiving sensitivity across various frequency bands.
Information on electrostatic discharge (ESD) handling precautions.
Recommendations for thermal management and dissipation area on the module.
Detailed measurements and tolerances of the EM120R-GL&EM160R-GL module.
Standard dimensions and nomenclature for the M.2 PCI Express form factor.
Visual representations (top and bottom views) of the EM160R-GL and EM120R-GL modules.
Compliance of the module's M.2 connector with PCI Express standards.
Details on tray size and procedures for packaging the modules.
To Next Page
