Need help?Do you have a question about the Quectel LTE Series and is the answer not in the manual?
General| Manufacturer | Quectel |
|---|---|
| Category | Control Unit |
| Model | LTE Series |
| Operating Temperature | -40°C to +85°C (dependent on specific module) |
| Supply Voltage | 3.3V to 4.3V (dependent on specific module) |
| Interface | UART, USB, SPI, I2C (dependent on specific module) |
| GNSS | GPS/GLONASS/BeiDou/Galileo (dependent on specific module) |
| Dimensions | Varies by model (e.g., 29.0mm x 32.0mm x 2.4mm) |
| Weight | Varies by model (e.g., approx. 5g) |
| LTE Category | Varies by model (e.g., Cat 1, Cat 4, Cat 6, etc.) |
Document revision history and details.
Procedures for enabling and disabling GNSS functionality.
Details the different types of NMEA sentences supported by the module.
Explains gpsOneXTRA assistance technology for improved GNSS performance.
Command for configuring various GNSS settings and NMEA output ports/types.
Command to enable the GNSS function, specifying mode and fix parameters.
Command to retrieve current positioning data like latitude, longitude, and time.
Command to retrieve specific NMEA sentences (e.g., GGA, RMC, GSV).
Command to enable the gpsOneXTRA assistance feature for faster TTFF.
Demonstrates turning GNSS on and off using AT commands.
Shows how to use the <nmeasrc> parameter for NMEA sentence acquisition.
Provides a step-by-step guide for using gpsOneXTRA Assistance.
To Next Page