Quectel LTE Series - AT+QGPSXTRATIME Inject Gpsonextra Time

LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual 22 / 29
Parameter
2.8. AT+QGPSXTRATIME Inject gpsOneXTRA Time
This command can be used to inject gpsOneXTRA time to GNSS engine. Before using it, customers must
enable gpsOneXTRA Assistance function via AT+QGPSXTRA=1 command. After activating the function,
the GNSS engine will ask for gpsOneXTRA time and assistance data file. Before injecting gpsOneXTRA
data file, gpsOneXTRA time must be injected first via this command.
OK
Write Command
AT+QGPSXTRA=<xtraenable>
Response
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference
<xtraenable> Enable gpsOneXTRA Assistance function, and the configuration parameter will be
automatically saved to NVRAM.
0 Disable gpsOneXTRA Assistance
1 Enable gpsOneXTRA Assistance
<errcode> Integer type. The error code of the operation. If it is not 0, it is the type of error. Please
refer to Chapter 4 for details.
AT+QGPSXTRATIME Inject gpsOneXTRA Time
Test Command
AT+QGPSXTRATIME=?
Response
+QGPSXTRATIME: 0,<xtratime>,(0,1),(0,1),<uncrtn>
OK
Write Command
Inject gpsOneXTRA time
AT+QGPSXTRATIME=<op>,<xtratime
>[,<utc>[,<force>,<uncrtn>]]
Response
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference