Quectel LTE Series - At+Qgpscfg=Beidounmeatype Configure Output Type of Beidou NMEA Sentences

LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual 12 / 29
Parameter
2.1.6. AT+QGPSCFG="beidounmeatype" Configure Output Type of BeiDou NMEA
Sentences
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "galileonmeatype",<galileonmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference
<galileonmeatype> Configure output type of Galileo NMEA sentences by ORed, and the
configuration parameter will be automatically saved to NVRAM. The default
value is 0.
0 Disable
1 GSV
<errcode> Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to Chapter 4 for details.
AT+QGPSCFG="beidounmeatype" Configure Output Type of BeiDou NMEA
Sentences
Write Command
AT+QGPSCFG="beidounmeatype"[,<
beidounmeatype>]
Response
When there are two parameters:
OK
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "beidounmeatype",<beidounmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference