Quectel LTE-A Module Series - W_DISABLE2# Signal

LTE-A Module Series
EM120R-GL&EM160R-GL Hardware Design
EM120R-GL&EM160R-GL_Hardware_Design 46 / 79
Table 16: RF Function Status
3.10.2. W_DISABLE2# Signal
EM120R-GL&EM160R-GL provide a W_DISABLE2# pin to disable or enable the GNSS function. The
W_DISABLE2# pin is pulled up by default. Driving it to low level will disable the GNSS function. The
combination of W_DISABLE2# pin and AT commands can control the GNSS function.
Table 17: GNSS Function Status
W_DISABLE1# Level
AT Commands
RF Function Status
High Level
AT+CFUN=1
Enabled
High Level
AT+CFUN=0
AT+CFUN=4
Disabled
Low Level
AT+CFUN=0
AT+CFUN=1
AT+CFUN=4
Disabled
W_DISABLE2# Level
AT Commands
GNSS Function Status
High Level
AT+QGPS=1
Enabled
High Level
AT+QGPSEND
Disabled
Low Level
AT+QGPS=1
Low Level
AT+QGPSEND