NB-IoT Module Series
BC660K-GL Log Capture Guide
BC660K-GL_Log_Capture_Guide 12 / 24
Table 2: Module Connection Status
3.2.2. Module Database Status
Check the database (DB) status of the module in the upper left corner of the EPAT tool.
Table 3: Module Database Status
EPAT can communicate with the module and capture logs.
EPAT cannot find the module and thus cannot capture logs.
EPAT fails to communicate with the module and thus cannot
capture logs.
EPAT fails to compare the Db.txt file with the target firmware since
there is no database in the designated path or the path of the
database has been changed without rebooting the module. In this
case, update the DB file referring to Chapter 4.4 or reboot the
device.
Db.txt file does not match with the target firmware. In this case,
update the DB file referring to Chapter 4.4.
Db.txt file matches with the target firmware and EPAT is ready to
capture logs.
To Next Page
Loading...
