Quectel BC660K-GL - Log Capture; Log Saving; Manual Log Saving

NB-IoT Module Series
BC660K-GL Log Capture Guide
BC660K-GL_Log_Capture_Guide 18 / 24
4.5. Log Capture
Click the start/pause/stop/clear icons in the upper left corner to control log capture flow.
Figure 10: Icons to Control Log Capture
Table 4: Introduction to EPAT Icons
4.6. Log Saving
4.6.1. Manual Log Saving
In EPAT, click “Save” on the toolbar or press the CTRL + S shortcut key to select in the pop-up window a
path to save logs, as follows:
Icon
Function
Description
Start/Resume
Start capturing logs or resume capturing logs after a
pause. The viewer refreshes the logging page
automatically.
Pause
Pause log capture for a view of the logs. You can
continue to capture logs later.
Stop
Stop log capture. At this time, you cannot add new logs to
the log file.
Clear
Clear the captured logs in display.